AMT Cast Iron Sewage & Trash Pumps

AMT Cast Iron Sewage & Trash Pumps

2-4″ Sewage Trash <540 GPM

    AMT Cast Iron Sewage/Trash pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Pumps are available in three NPT port sizes: 2", 3" or 4". Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N O-rings and check valves. Built-in check valve allows pump to reprime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. These sewage/trash pumps will easily handle liquids containing sewage, stones, sticks, mud and other solids. Minimum liquid requirement must be above 85% — maximum 15% solids. Failure to do so may damage pump and void warranty.

    Cast Iron Sewage & Trash Pumps

    • Cast Iron Construction
    • Silicon Carbide/Viton® Mechanical Seal
    • 2", 3" & 4" NPT Ports Sizes
    • Maximum Temperature 180° F
    • Self-Priming to 20 Ft.
    • Stainless Steel Semi-Open, Clog Resistant Impeller
    • Buna-N Check Valve and O-Ring
    • Removable Cast Iro Volute/Wearplate
    • Easy Cleanout Design
    • 3" & 4" Models Feature Front Cleanout
    • Pull-from-Rear Design
    • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors

    Pump Dimensional & Specification Data

    Model HP PH SUC* ENC Frame Voltage
    @ 60 Hz+
    Full
    Load
    Amps
    Max
    Solids
    DIS* Length** Width** Height Ship
    Wt.
    (Lbs.)
    316B-95
    316A-95
    3
    3
      2
    2
    TEFC
    TEFC
    56J
    56J
    230
    230/460
    16
    8/4
    1"
    1"
    2
    2
    20.3[51.5]
    19.9[50.5]
    9.3[23.6]
    9.3[23.6]
    8.8[22.3]
    8.8[22.3]
    94
    87
    393B-95
    393A-95
    5
    5
      2
    2
    TEFC
    TEFC
    184JM
    184JM
    230
    230/460
    20
    17/9
    1"
    1"
    2
    2
    27.4[69.6]
    24.9[63.2]
    13.4[34.0]
    12.3[31.2]
    10.0[25.4
    10.0[25.4]
    189
    173
    394B-95
    394A-95

      3
    3
    TEFC
    TEFC
    215JM
    184JM
    230
    230/460
    31
    22/11
    1½"
    1½"
    3
    3
    31.1[79.0]
    26.6[67.5]
    15.5[39.4]
    13.5[34.3]
    12.5[31.7]
    12.5[31.7]
    248
    226
    394F-95
    394E-95
    10
    10
      3
    3
    TEFC
    TEFC
    215JM
    215JM
    230
    230/460
    40
    26/13
    1½"
    1½"
    3
    3
    34.3[87.1]
    33.4[84.8]
    15.5[39.4]
    14.3[36.3]
    15.1[38.3]
    15.1[38.3]
    450
    330
    399C-95 15   4 TEFC 215JM 230/460 47/24 2" 433.4[84.8] 14.3[36.3] 15.1[38.3] 350
    (*) Standard NPT (Female) pipe thread.
    (**) This dimension may vary due to motor manufacturer's specifications.
    NOTE:Dimensions are in inches (centimeters) and have a tolerance of ±1/4".
    (+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities).
    NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).



    Standard Features

    • Cast Iron Construction for Abrasive Resistance and Durability
    • Silicon Carbide/Viton® Mechanical Seal
    • Built-in Buna-N Check Valve
    • Buna-N O-ring Casing Seal Reusable After Clean Out Maintenance
    • Self-Cleaning Stainless Steel Impeller Resists Clogging and Wear
    • Pull-from-Rear Design Permits Clean Out and Repair Without Removing Piping
    • 3" & 4" Models Feature Front Cleanout
    • Replaceable Cast Iron Volute/Wearplate Designed for Solids Handling
    • Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
    • Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric Motors
    • Single or Three Phase, 3450 RPM Motors
    • Optional Mounting Base Available for 184/215 JM Frames
    • Maximum Working Pressure 150 PSI
    • Seal Flush Port Provided on 5 HP and Larger
    • Optional Mounting Base Available
    • QSP – Quick Ship Pump for Many Models

    Related Products:



     

    eXTReMe Tracker